Well water means the pump matters
Most Rochester homes run on private wells. No power, no water, and the well pump is often the first thing people want on a generator. Its circuit, pressure switch wiring and any shared loads are worth getting right, along with a generator connection that can actually start the pump.
Barns, garages and outbuildings
Bigger lots mean detached garages, workshops, horse barns and sheds that need real power: a subpanel, a properly buried feeder at the depth the code requires, and grounding done right at both ends. Glenn plans the run, the size and the protection for what you'll actually use out there.
Newer homes, growing loads
Rochester also has plenty of newer houses on country roads. Those are the homes adding EV chargers, heat pumps and finished basements, and it's worth checking the panel's capacity before the new equipment shows up.
Common jobs in Rochester
- Well pump circuits and generator hookups
- Feeders and subpanels for barns and garages
- EV charger circuits
- Service upgrades for heat pump conversions
- Troubleshooting on older farmhouse wiring
Can my generator run the well pump?
Usually, if the generator is large enough to handle the pump's starting surge and the pump circuit is on the generator side of your inlet and interlock or transfer switch. Starting current for a well pump is several times its running current.
Glenn can check the pump's rating and your generator's output and tell you whether it will start reliably.
How do I get power out to a barn or detached garage in Rochester?
Typically with a feeder from the house panel to a subpanel in the outbuilding, run underground in conduit or as rated direct-burial cable at the depth the code requires, with grounding at the building.
The size depends on what you'll run: lights and outlets need far less than a welder, heaters or an EV charger. This is permitted work and isn't a DIY project.
Do you serve all of Rochester?
Rochester borders Wareham, so it's a short drive from West Wareham. Call with your road and the job, and Glenn will tell you straight away.
Nearby
Neighboring towns.
Sparks, smoke, a hot panel or a burning smell? Turn off the breaker or the main if you can do it safely, then call. For fire or smoke, get out and call 911. For a downed line, stay clear and call Eversource.